Another one just shaped... 9'2" "Oceanslider" shaped by David Falkenau for Wayne @ Hill Street Cafe

I shaped this one with hard down rails all the way around for speed. This one has little bit of roll in first 3rd, goes harder in the middle third, and the last 3rd to is hardest, with the last 18" sharp as a straight razor.

I love pintails, so I went with a pintail.

This one will got a 10.5" box 7" up from the tail. I made it to have thw Thrailkill Twin set-up, but Wayne decided to go with a Single.

This is going to be glassed with Canary Yellow resin tint/pigment and finally glossed and polished.

I guess you can say this is my "Single Fin Yellow"!

Wayne is the Longhaired guy at Hill Street Cafe (with the Green Truck and Window Washing Business). He surfs this board at the Oceanside Pier all the time now.

9'2" "The Glide" shaped by David Falkenau

Skip Frye Template traced from Chad Brienza's Frye.

Nose rocker: 4 1/4"

Tail rocker: 2 5/8"

Thickness: almost 3 1/8" at stringer but foiled out through the rest of the board and rails, so it doesn't seem as thick

60/40 Palm-of-hand-shaped rails

hard edge last 18"

2+1 Set-up (Frye Placement) 8" box 6 5/8" to 7" up from tail, plus 2 FCS plugs on each side parallel to and lined up with front edge of box.

Top-notch $400 glass job:

I went all out on this glass job... didn't cut any corners... laid it all out on the line!

Volan Cloth w/taped & cut laps

Resin Pinlines

Bottom & Rails - Opaque Red, White, Blue Resin Swirl

Top - Transparent Red, White, & Blue Resin Swirl

Black Pinlines

Gloss & Polish

It turned out to be a beautiful board. My dad wanted to ship it back home to Michigan when he saw it at my house... I sure wish I wasn't hurting for money then... I would have liked for him to have had it.

Stop the Slaughter!!!!!!!!!!!!!!!!!!!!!!!!!

Stop the Slaughter!!!

In case you didn't know...

I give piano lessons, at all levels. I specialize in southern blues rock and roll.

I also give shaping lessons.

I also tutor in English, and edit documents as well.

If you are interested in any of the above, please contact me on my cell:

619-757-0100

Dave

I WANT TO SHAPE YOUR NEXT SURFBOARD!!!!!!!

I make custom surfboards (wood or foam; fiberglass or epoxy); fins; skate decks; nose & tail blocks; wood racks; wood board hangers; board straps; etc.

My shapes are all custom tailored to your needs.

I innovate templates from past and present cutting edge designs, as well as original templates and designs, fluid curves, and foils designed for speed, drive, flex, hold, release, trim, and glide!

My biggest influences are Skip Frye & Bill Thrailkill -- two masters of speed and trim in both small and large surf.

I got my start shaping boards out of necessity in the 80's. We didn't have surfshops to buy boards from where I grew up, so I salvaged old boards, broken boards, and became Grubby Clark's main surfboard blank customer in the Great Lakes Region.

I taught myself the trade through trial and error.

I have lived and surfed all over the world, and have owned and ridden a quiver of well-over 100 surfboards by various legendary shapers; all of which I studied, templated, and emulated early in my shaping career.

I know what works, and I apply my knowledge of air foils, hydrodynamics, and fluid dynamics to my own designs.

If you want a custom board made for you specifically, come by my shop or give me a call and we'll work something out.

Thanks for your support!

Sincerely,

David Vernon Falkenau

Artisan Surf Designs / Falkenau Surfboards & Fins
2658 State Street
Carlsbad, CA 92008
619-757-0100
info@artisansurfdesigns.com
http://www.artisansurfdesigns.blogspot.com

Quality, not quantity! Hand Shaped in the USA, NOT machined overseas!

SUPPORT SWAYLOCKS!

If you haven't been to swaylocks.... you are missing the best board design forum on the planet!

DAVID FALKENAU LIVE! TONIGHT @ JAVA JONES, 9th & MARKET ST., Downtown, San Diego!!! Show Starts @ 7PM!!!!!

If you are interested, take the 15 to down town or the I-5 to down town, get off on 10th and take it to Market St. Take a right onto Market and another Right on 9th, and you are right there... JAVA JONES. It is a child friendly coffee house, and music will be from 7-10PM, and I do not know what time I go on. There are 3 of us playing 40 minute slots, so I don’t know which I am playing.

JAVA JONES MUSIC, hosted by Matthew Blake, featuring, original music from David Falkenau (with Greg Stewart on percussion), Chad Cavanaugh, and Nathan Welden.

Thanks!

Hope to see you there!

-David Falkenau
619-757-0100

The Magic of Danny Hess

Danny Hess Surfboards

---

Danny Hess is a green carpenter who turned his attention to hollow wood surfboards a few years ago. His professional woodworking skill and his skill as a top-level surfer at Ocean Beach were combined into a new craft. I've been fortunate to be able to watch some of the refining of his craft as he reached his current level of expertise, where he is making shortboards that weigh 8 pounds out of wood and epoxy. It is unquestionable that you will be amazed at the quality of the workmanship. As to the shapes, he has one of the best testers in the state in his own two feet. If you are at all interested, give him an email or ring, and check out some of his work.

The Making of a Custom Surfboard

A look at how a veteran craftsman builds a board with materials chosen to minimize environmental impact

By Jeffrey Gangemi

For the past eight years, Danny Hess, 31, a veteran surfboard shaper based in San Francisco, has been making surfboards out of natural materials to minimize their impact on the environment without sacrificing performance or aesthetics. Hess is one of a small but growing number of independent shapers finding increasing demand for these "cleaner" boards. In fact, a year and a half ago, Hess closed his environmental design firm and took on board-making full-time. Today, he uses wood harvested from forests that are then replanted, and a kind of recyclable foam called EPS, in a hand-built construction process that he says makes his boards last for "generations, instead of a few months." The starting price is $1,100, compared to $400 for a low-end commercial model.

Built to Last

Each Danny Hess surfboard is built using wood, such as poplar, which he chooses because it is grown locally and replanted. Hess says his boards have a lifespan far longer than a conventional surfboard-as long as 10 years as opposed to a few months-because the wood does not fatigue and break down the way the foam in a traditional board does.

Making the Mold

The first step in the process is building what Hess calls the perimeter frame. Each perimeter frame is constructed using a system of molds and templates, which creates the board's rail outline, foil, and rocker. Using pneumatic pressure, Hess creates molds that become the board's outline, and glues cork and wood into the mold that creates the frame.

Trade Secrets

The second step is fashioning the interior frame, which is made from pieces of EPS foam. The process of making a Hess interior frame is proprietary, but it involves shaping the top and bottom contours of the board, and inserting pieces of foam to fill out the open spaces between the perimeter frame.

Serious Recycling

Since Hess uses foam in pieces as opposed to a single blank, he often has extra pieces of foam, which he sends back to the EPS foam company to be recycled and used in future foam blanks.

Giving It Shape

Hess puts all the pieces of the interior and perimeter frame together. He shapes the whole board to create the deck and bottom contours, using a plane and vices.

Organic Outerwear

Next, Hess creates a wood skin for the deck and bottom of the board out of a lightweight, strong wood such as poplar, birch, or vertical grain fir.

In a Vacuum

Hess then bonds the wood skin to the EPS foam and perimeter frame to create a strong, unified structure. The bonding process takes about an hour, and occurs within a vacuum bag, which helps bond the thin wood skin to the interior and external frames. The process of creating a Hess "blank" takes about five times longer than the traditional method.

Hand Shaping

Next, Hess shapes the wooden rails. This is the point in the process where the specific shape of the board is created. It's considered the most critical step for creating a board with optimal performance. The rail-shaping process takes Hess between one and two hours, depending on the shape and size of the board.

Final Steps

Hess sends the board to a local laminator (referred to in the trade as a "glasser") to be coated in a strong, epoxy-based resin. Hess uses epoxy because it emits low volatile organic compounds and doesn't require solvents for cleanup. After it has been glassed, the board is finished and sent to its new owner, who will pay between $1,100 and $1,500 on average.

Hess Surfboards

Danny Hess is a master woodworker and native Californian. He makes beautiful boards from sustainable materials including Poplar, EPS and Cork.

Daniel Hess is a true craftsman who designs and builds beautiful, strong, high performance surfboards. His use of recyclable and sustainable materials alongside a design methodology emphasizing the strength and longevity of each surfboard, results in a process that has far less environmental impact than that of a conventional polyurethane / polyester surfboard.

Integrated into the design of each board are materials with a lower environmental impact such as sustainably harvested wood, cork - a renewable resource, EPS foam which is the only recyclable surfboard foam and an epoxy which emits very low Volatile Organic Compounds and does not require solvents for clean up.

Each Hess board uses one half the fibreglass of a conventional surfboard, while remaining far stronger due to its design, the materials used and its construction. And, the use of wood in Hess boards avoids the more rapid fatigue and break down that conventional foam boards suffer, ensuring that each Hess board has a long and useful life.

Hess Pacheco Quad

Pacheco Quad - Beautifully crafted by Danny and inspired by the outlines of Rich Pavel and Manny. Made with sustainable materials.

Hess Pacheco Quad

HESS SURFBOARDS - PACHECO QUAD

Inspired by the beautiful outlines of Rich Pavel and Manuel Caro of Mandala, this quad fin outline utilizes streamlined curves, pronounced hip through the tail, and a more progressive foil and entry/tail rocker. These elements work together to create a board that responds to a full range of surf and really comes to life in ever changing beach break conditions

Rails: Poplar/Cork

Skin: Birch

Fins: Vector/Quad/Twin/Keel

Dimensions: n/a
Weight: n/a

The Bite

Wanna listen to the other flock of seagulls? Grab your graphic-print skinny tie, and head to the beach. But first, paddle on over to SF surfboard shaper Danny Hess. This eco-conscious surfer creates sleek-looking, custom-made boards by hand from reclaimed and sustainably-harvested wood, renewable cork, recyclable foam, and epoxy that doesn't off-gas VOCs. Set up a meeting, and he'll design a board from scratch that fits your needs - shapes range from traditional twin keel fish to maverick guns. And while prices run a few hundred bucks more than your average board, epoxy boards can last up to five times longer than conventional ones, meaning fewer surfboards end up landfills. They're also nontoxic, so you'll be riding new waves without polluting them.

Year Built: 2006
Dimensions: 5'6
Shaper: Daniel Hess
Manufacturer: Hess Surfboards
Location: San Francisco Ca.

Here is my most recent Hollow wood/ EPS interior frame fish. A sleeker outline working with the vector quad fin setup to create a high performance board.Single Concave bottom. Poplar/ cork rails, poplar skin and a 1lb. Eps frame. This one comes in at 7.5 lbs.

Hess Surfboards

Danny Hess surfs Ocean Beach, San Francisco. A beach break with a reputation for holding a swell up to whatever size you can personally manage and making even the strongest surfers sulk all the way home. It’s a fast hollow wave. On big days most people are lucky to even make it outside. There are stories of Ocean Beach locals running stairs and doing pull-ups in preparation for the cold and unforgiving winter swells. It’s here that Danny has proven that his hollow wood boards are not just a throwback to traditional shapes but future-sleds, boards capable of speeding around sections and drawing clean lines before disappearing into the cavernous beach break barrels, boards that will do so year after year and then eventually turn back to dust.

Danny is not new to green construction methods. As a green building contractor in the Bay Area Danny was familiar with the ins and outs of sustainability. A passion for surfing and woodworking eventually launched him into a full-fledged board building lifestyle. Danny combines perimeter rail technology with EPS spine and ribs and wraps the boards in Epoxy. His boards look like fine furniture. But how do they work? The photos on his site and the ones provided here for us by Erin Kunkle are the proof. From cold Ocean Beach barrels to blue Indonesian perfection, Danny’s boards seem to fit, fly and flex perfectly.

One striking aspect of Hess’s approach is his outright commitment to making a product with environmental ethics in mind. He is clear about the materials he uses and makes sure that longevity is part of his surfboard’s characteristics. One of the first people to respond to our request for an interview, Danny was stoked about our plans to explore sustainably minded surf products. After some time we finally bring you this interview. Check out his boards at www.hesssurfboards.com

Also check the new blog at www.hesssurfboards.blogspot.com

Q. Please tell us a little about yourself and how Hess Surfboards came to be.

A. First off let me thank you for starting this website and inviting me to participate. The evolution of Hess Surfboards has been a pretty organic process. I began making my own boards when I was around 16 and have become more and more committed to it since. My original motivation for making boards is the same now as it was when I began- to make a stronger, longer lasting, more functional surfboard.

My first 30 or so boards were made from traditional PU/PE materials, but when I began making a living as a green builder/ designer about 8 years ago and moving towards a more sustainable way of living, I became very motivated to build a surfboard with far less environmental impact. I spent just about all of my free time when I wasn’t surfing or working on clients homes developing the fundamentals of my technology and method for building these boards. I never doubted that wood was the best material to use. I was very familiar with it, nothing can do what it does and I had established a lot of great sources for sustainably harvested wood through the work I was already doing. The first board took me over 160 hrs to build, and each generation since has taken far less time, been far lighter, and much stronger. It has been a continuous process of trying many different ways of putting all of the elements together to get better results.

The last couple years I feel that I’ve come to a refined point where I am no longer making these dramatic changes in the construction of each board. I feel very confident that the makeup of each board, as they are now, is what I’ve been working towards for these years. It never occurred to me in the beginning that I would be building these boards for a living. My motivation has always been a personal one. At first I began building these boards for a few local Ocean Beach surfers that were interested and over the last seven years it has slowly evolved in to building boards for people all over the world and it’s how I now make a living.

Q. In some of my research on surfing forums I have encountered surfers who think of the idea of green surfing as being “hippy lovin, tree huggin, soy drinking” rubbish. Essentially the kind of lackadaisical attitude that mass media assigns the surf world. How do you think this point of view can change? Have you experienced this kind of banter in your work?

A. “Go shape a pickle if you want a green surfboard”. That was always my favorite comment when I first began posting my “green” surfboards and ideas online. A lot of people seem to think that you need to sacrifice a boards’ performance to build a board that has less environmental impact. I think the opposite is true. It is totally possible to build a healthier surfboard that lasts far longer and performs far better than the conventional boards that the majority of surfers are riding today. This has been my main motivation in building and developing the technology that goes into each of my boards.

When I began selling my wood surfboards for a living, unfortunately clients were not coming to me because they wanted a surfboard that was better for the environment. Now that is the motivation behind a large number of the orders I get. I do think there is a growing level of awareness in the surfing world. Clark’s closure forced people think about where their surfboards come from. Patagonia and the Malloy brothers are certainly having a positive impact, and websites like this one are now finding audiences where there wasn’t before. I truly feel that we are at the beginning of a larger acceptance and awareness by the surfing population that the idea of living in a more sustainable way is good and maybe even cool. I believe it is inevitable for each surfer to, at some point, to look at their very close relationship with the ocean and draw the conclusion that it is something that they need to actively protect.

Q. Part of beginning a dialog about sustainability involves understanding what the concept is exactly and how it relates to surfing. What does sustainability mean to you and how do you apply it in your work?

A. My definition of true sustainability is the unaltered natural environment functioning in perfect balance as nature intended it to be. Examples of this are certainly rare in today’s world, and becoming rarer each day. In my everyday life I try to look at it as an ongoing process of moving towards a greater balance. Actively finding ways to decrease my negative environmental impact in all areas of my life and being thoughtful about the resources I use.

Q. It seems to me that maybe we need a new aesthetic. Your boards are hand crafted and finished beautifully. And the work that goes into them is a lot different than say, buying a close tolerance blank and shaping the rails. Do think that there is a renaissance of craftsmanship and artistry in surfing right now?

A. There have certainly always been truly great craftsman building surfboards from all sorts of materials and not caring about how much money they will make or how long it will take to make a board. I think that rather than just a renaissance of craftsmanship we are seeing the evolution of the surfboard really beginning to accelerate again. The vacuum caused by Clark’s closure has really allowed for craftsman building alternative, non-mainstream, types of surfboards to come out of their caves, receive a bit more acceptance from the surfing world, and really explore the possibilities of what they are building. On top of that there seems to be a growing number of surfers that are open to trying alternative shapes and fin setups, as well as valuing and appreciating a surfboard that is made by hand. The combination of these things makes for a really exciting time in surfing and the evolution of the surfboard.

Q. Thanks so much for your time Danny. Any last words or thoughts you’d like to leave our readers with?

A. A wise friend and mentor said to me that a truly great surfboard is one that seamlessly blends art with science. The point where the two become blurred is what I love about a well built hand made surfboard. It is the thing that makes a magic board and what makes a well crafted, hand made surfboard something beyond a product or widget. It is definitely what keeps me motivated to continue improving and developing the boards I am building. Many thanks.

Hess Rail Blend

Future classic: Surfing legend Dan Malloy calls his 5-foot-10 Danny Hess surfboard “the fastest I’ve ever ridden.” And not only is it fast, it’s politically correct: Hess, an Ocean Beach regular, is making a fine art of creating high-performance, environmentally sound boards. Instead of fragile, toxic fiberglass, he works with sustainably harvested wood and cork and recyclable foam. His fishes, quads, and guns have the life span of the old balsa single-fins and the speed and agility of modern shapes. “They’ll last about 20 years,” says Hess. “The only place I don’t guarantee them is Mavericks.”

Danny Hess, of Hess Surfboards, has been using wood, expanded polystyrene (EPS), which is recyclable, and an epoxy resin that releases 80 percent fewer VOCs into the air than the standard polyester resin, to make boards for six years. EPS is the most widely used alternative to polyurethane foam, and it is similar to the Styrofoam used to make beach coolers. The boards are as light and even stronger than traditional ones, but some surfers have complained that EPS boards aren’t as responsive to their movements. Hess’s boards are encased in sustainably-harvested or reclaimed wood. “The combination of the materials I use produce the strongest, most functional and environmentally-conscious surfboard I can build right now,” says Hess. While it is an improvement on conventional board-making methods, it’s petroleum-based, so it won’t become a long-term solution. “Chemicals are still involved, and I’m always searching for better alternatives that release fewer toxins into the atmosphere,” Hess says. “What I really want to see is a bio-based, EPS-quality foam.”

Some other woodsmiths and master craftsmen worth checking out…

· Dick Brewer; "Plumeria Surfboards", Hanalei, Hawaii; www.plumeriasurfboards.com

· David Falkenau; “Artisan Surf Designs: Falkenau Surfboards & Fins”, Carlsbad, CA next to Legends Surf Shop on State Street; www.artisansurfdesigns.blogspot.com

· Daniel Hess; “Hess Surfboards”, San Francisco, California; www.hesssurfboards.com

· Paul Jensen; “Surfboards by Paul Jensen”, Lacey, WA; www.hollowsurfboards.com

· Dirk Langer; “Vintage Wooden Surfboards”, Cayucos, CA;www.vintagewoodensurfboards.com

· Roy Stewart; "Power Surfboards"; New Zealand; www.olosurfer.com

· Tom Wegener; “Wegener Surfboards”, Noosa, Queensland, Australia; www.tomwegenersurfboards.com

Artisan Surf Designs will be relocating to Carlsbad next month!

Artisan Surf Designs and Falkenau Surfboards will be making its new home in Carlsbad next month! My good friend Jeff Warner of Warner Design Co. and Legends Surf Shop located at 2658 State Street has offered me a shaping bay attached to Legends Surf Shop. Now you'll be able to come on in, shop around for a new or used board, and can even watch me as I shape your new surfboard!

Once again, that's 2658 State Street, Carlbad.

-Dave

Custom Surfboard Bags by Melissa Falkenau

Custom Surfboard Bags
by Melissa

Heavy Duty Canvas Fabric
Any Color or Pattern

$10 Per Board Foot
Any Size / Any Shape

760-500-7303

alilmiss717@yahoo.com
www.artisansurfdesigns.blogspot.com

Here are some other "Phin" concepts by David Falkenau

Check these out too... I can't tell you what kind of wood these are because I salvaged it, but I will be foiling them next week.

They are all base on the original Phil Edwards reverse fin from 1960-61.

I'd be glad to make some more for anyone interested.

- David Falkenau
Artisan Surf Designs / Falkenau Fins