I just made a fresh batch of Glass-On Fins. My Inventory is constantly changing because I mainly do this as a hobby, so I take my time, and make sure my fins are very high quality. For my fiberglass fins, I pay to have the fin panels oriented and laid up for me. Then I take the fin panels back to my shop, trace my templates onto them, cut the fin blanks from the templates on my band saw or with my jig saw (depending on the material), foil them with my Makita sander / grinder, fine tune them by hand-sanding and hand-polishing them, and once they are quality enough to be glassed on a board, I sign them. Check with me on sizes and colors. I also make Wood Baltic Birch Ply Fins and Carbon fiber reinforced fins (which are slightly more expensive due to the carbon fiber material that is used).
Side Bites / Side Runners / Bonzer Runners (1 pair)... $30;
Twin-Fin Set (1 pair)... $35;
Keel Fins / Fish Fins (1 pair)... $40;
Tri-Fin Set (Set of 3 fins)... $45;
Quads / Twinzers (Set of 4 fins)... $50;
Give me a call at 619-757-0100, and I will meet you over at my shop (2658 State Street, Carlsbad, CA 92008) to show you the fins I have.
Thanks,
Dave
